Electronic components for Radiant Energy - Impulse Technology

The combined electronic components create impulses, literally resonating voltages. That is, there is no resonance when the impedance of the coil is equal to the impedance of the capacitor as in an oscillating circuit consisting of a capacitor and coil. The purpose of this impulse and resonance is to generate Radiant Energy. This is the technology of Nikola Tesla, aka Impulse Technology.

Citing Tesla Patents. In Figure 2: Tesla's "push - impulse" mechanism is a combination of mechanics and electricity

Mechanical impulses will be replaced by electronic circuits.

Here are some electronic components to create a radiant energy generator:

1. Controls MOSFET SWITCHING Frequency

Module Highlights:

• The use of imported dual-MOS parallel active output, lower resistance, more current, strong power. At room temperature to provide current of 15A, 400W power;
• Wide voltage input, support PWM;
• Easy to control high power devices.

See More: 

• 15A 400W MOSFET Trigger Switch Drive Module PWM Regulator Control Panel
• SWITCHING MOSFET
• MOSFET

2. Capacitor

With each different type of electronic circuit needs corresponding capacitors. So check out these free sharing articles on the MORAY GENERATOR Website for specific capacitor specs.

Find and buy: Capacitor

3. Bifilar coil

Just buy a speaker wire to make your own Bifilar coil according to the instructions of Master Ivo

How to make a bifilar Tesla coil. The easy way:

Buy speaker wire: 

• Speaker Cable 100,150,200,300 Core Oxygen Free Copper DIY HIFI for Audio Amplifier Home theater KTV DJ Speaker Audio Wire
• Speaker Cable
• 1pair Audiomeca hifi speaker cable speaker cable pocc silver plated copper conductor Gold Plated Banana Plug

4. Diodes

Should choose diodes that can withstand high frequency, high voltage. This is characteristic of Radiant Energy.

High Voltage Diode of Frequency Conversion Microwave Oven New original

Here are many options: 

• Diodes for high frequencies
• 1pcs/lot UX-C2B High Voltage Diode of Frequency Conversion Microwave Oven New original
• 50PCS High Quality ERD09-15 Plug-In High Frequency Diode High Voltage Rectifier D09-15

5. Battery

Most electronic circuits use a time-constant direct current, called the DC voltage. The electronic circuit generates radiant energy (according to Tesla technology) as well, the voltage from the battery is supplied to the pulse generator, to activate the system. As a result, the input energy is greater than the input energy, aka C.O.P > 1 ( Overunity )

See more:

• New Power Display 12v 60A 18650 Lithium Battery Pack Is Suitable for Solar Energy and Electric Vehicle Battery + 12.6v3a Charger
• Battery for inverter
• Power storage battery for home

6. Inverter

This is the device used after successful extraction of radiant energy. Normally, the Overunity Voltage exploited will be charged to the Battery. Or another alternative is:

• The output voltage will go straight to the inverter to convert. Depending on the type of inverter that integrates the rectifier bridge diode or not, we will decide for the high frequency voltage and high voltage to be exploited.
• Go into homemade electronic circuit to convert to desired voltage forms.

See more:

• High Quality PSW Pure Sine Wave DC 12V/24V/48V to AC 110V/220V 5000W Peak 10000 Watt Power Inverter
• 5kw Pure Sine Wave Inverter 12V/24V To AC110V 220V 5000W Voltage Transformer Power Converter Solar Inverter LED Display
• Inverter

7. Other electronic components and devices

There are many other electronic components for pulse technology - radiant energy. Above are the common components.

Depending on the understanding of electronic circuits, understanding the nature of radiated energy, from which you can create your own circuit.

There's an extremely important electronic device in radiant energy generation technology that you need to use: Square Wave Generator